Jimi_Hendrix
11-02 02:41 PM
cases where I140 is approved and I485 is pending for more than 6 months i.e. AC21 cases? I think in these cases you can move to a different state. Can anyone validate this?
wallpaper Happy 11th anniversery
485Mbe4001
06-13 01:12 PM
you should be ok by october - november, cheers...
Hello everyone,
I am on the EB3 category and have a PD of March 19, 2002. Also, I am from a non-retrogressed country (Brazil). Would any of the wise members of this forum be willing to estimate how much longer I'd have to wait until I am concurrent? Thanks in advance.
Hello everyone,
I am on the EB3 category and have a PD of March 19, 2002. Also, I am from a non-retrogressed country (Brazil). Would any of the wise members of this forum be willing to estimate how much longer I'd have to wait until I am concurrent? Thanks in advance.
psam
12-16 10:58 AM
Thanks psam. Did they say what was the issue and how many days did it take to get the card after the issue was found out?
I took usual 20/25 days. Dont exactly remember.
I took usual 20/25 days. Dont exactly remember.
2011 Happy Anniversary Poems to My
Sath thesmilingstar
02-24 05:09 PM
Yes.. u can apply for FAFSA.. U do qualify. U can either PM me or Call them directly. They are very helpful.
Good Luck..
RV..
"AP is Advance Parole" to enter US.
yes i did call them and they were asking me for a social security number which i donot have so how do i deal with this.
Good Luck..
RV..
"AP is Advance Parole" to enter US.
yes i did call them and they were asking me for a social security number which i donot have so how do i deal with this.
more...
md_alien
06-22 11:55 AM
Skin test is mandatory unless you provide proof to the USCIS civil surgeon that you have done skin test in the past and the results were "POSITIVE"
As per my doc, if one has a "POSITIVE" skin reaction to PPD test, they should never take the skin test again as there is a danger of severe inflammation.
Another point to note is that if the reaction to PPD is over 10mm (even if X-Ray is negative) USCIS might want documentation to prove that you have been evaluated by the State's Public Health Dept and undergoing treatment. This is my personal experience as I had 16mm reaction to PPD. I have a copy of the RFE and can upload a scan if it benefits the community in general.
In US, a positive skin test result is interpreted as the person having had exposure to Tuberculin bacteria in the past which are lying dorman in his/her lungs. They will want to start a 4 mnth antibiotic treatment to eliminate the dormant bacteria. I'm currently on the course, 2 pills a day, although I had negative X-Ray. :mad: :mad: :mad:
As per my doc, if one has a "POSITIVE" skin reaction to PPD test, they should never take the skin test again as there is a danger of severe inflammation.
Another point to note is that if the reaction to PPD is over 10mm (even if X-Ray is negative) USCIS might want documentation to prove that you have been evaluated by the State's Public Health Dept and undergoing treatment. This is my personal experience as I had 16mm reaction to PPD. I have a copy of the RFE and can upload a scan if it benefits the community in general.
In US, a positive skin test result is interpreted as the person having had exposure to Tuberculin bacteria in the past which are lying dorman in his/her lungs. They will want to start a 4 mnth antibiotic treatment to eliminate the dormant bacteria. I'm currently on the course, 2 pills a day, although I had negative X-Ray. :mad: :mad: :mad:
cahaba
04-13 12:36 AM
Hello All,
I came across this site while researching for *urgent* solutions or options that my friend needs to pursue or has.
These are my friend's details --
EB3 -- India.
I140 approved in July 2007.
485 filed in July 2007.
MS in Engg from USA.
MBA in Finance from top ten school in USA.
Has applied for couple of patents in tech field.
Author of few papers in tech field.
My friend worked for his green card petitioning employer for 7 years in a technical position on H1 visa. He had to leave this job under some unfavorable circumstances around a month back. He has now taken a job as Marketing Manager for a big firm and is using his EAD. Two weeks back he has received an RFE on his 485 application. (Very curious and bad timing indeed too). This RFE needs a Employment Verification Letter. The current position that my friend works as does not match the position description on his labor petition. The RFE reply needs to be sent in within next 2 weeks.
What are his options to reply to the RFE? One of the lawyers that was consulted said that since Green Card is for a future position, he needs to get a legit letter from a future employer that the employer is willing to hire my friend after he gets his green card.
Also suggested were EB2-NIW and self-employment options.
What would you suggest -- best course of action? Would you know anybody who has gone through a similar situation. Any fallback options that my friend needs to evaluate?
I really appreciate all your replies. Pl treat this as very urgent.
Thanks.
I came across this site while researching for *urgent* solutions or options that my friend needs to pursue or has.
These are my friend's details --
EB3 -- India.
I140 approved in July 2007.
485 filed in July 2007.
MS in Engg from USA.
MBA in Finance from top ten school in USA.
Has applied for couple of patents in tech field.
Author of few papers in tech field.
My friend worked for his green card petitioning employer for 7 years in a technical position on H1 visa. He had to leave this job under some unfavorable circumstances around a month back. He has now taken a job as Marketing Manager for a big firm and is using his EAD. Two weeks back he has received an RFE on his 485 application. (Very curious and bad timing indeed too). This RFE needs a Employment Verification Letter. The current position that my friend works as does not match the position description on his labor petition. The RFE reply needs to be sent in within next 2 weeks.
What are his options to reply to the RFE? One of the lawyers that was consulted said that since Green Card is for a future position, he needs to get a legit letter from a future employer that the employer is willing to hire my friend after he gets his green card.
Also suggested were EB2-NIW and self-employment options.
What would you suggest -- best course of action? Would you know anybody who has gone through a similar situation. Any fallback options that my friend needs to evaluate?
I really appreciate all your replies. Pl treat this as very urgent.
Thanks.
more...
pappu
02-03 07:39 PM
Congratulations.
2010 Happy Anniversary
bmoni
12-22 08:32 PM
Have any one changed employer right after I-140 approval.
Please post your experience
Please post your experience
more...
dpp
02-21 01:15 PM
May be there is some problem with your system. It was updated in the morning only and we are all getting the latest one. Please clear cache and try again.
I saw that in morning , trust me its one of those things I do on my laptop everyday in the morning.
I try to access the page now and it shows the old one ...hehe :mad: ..
Hopefully they are in the process of correcting/retracting ...
I saw that in morning , trust me its one of those things I do on my laptop everyday in the morning.
I try to access the page now and it shows the old one ...hehe :mad: ..
Hopefully they are in the process of correcting/retracting ...
hair wedding anniversary quotes for
voldemar
03-20 11:15 AM
Not sure how withdrawing an approved I140 is good for the employee??
The general feeling is that I140 withdrawal is not necessary for the employer (but H1b is). But employers used to do this for labor substitution - now there is no such incentive. But still some lawyers suggest employers to do this - in my old company which is a large well known software company (with 10k+ employees worldwide) the HR group follows immigration attorneys almost blindly. All immigration issues are handled by a big law firm - many of regular immigration matters are done by paralegals who does not know much (I am not exaggerating when I say I know more than them) - but our HR has a policy that they would follow what those attorney/paralegal is saying. It seems the law firm is suggesting them to withdraw all applications including approved i140 - obviously the law firm would charge them for this so that is their interest.
And law firm is right, they protect their clients. Search this forum for I-140 revocation by USCIS. I-140 was approved and then revoked by USCIS itself. In that case AC21 does not help, 485 will be denied.
The general feeling is that I140 withdrawal is not necessary for the employer (but H1b is). But employers used to do this for labor substitution - now there is no such incentive. But still some lawyers suggest employers to do this - in my old company which is a large well known software company (with 10k+ employees worldwide) the HR group follows immigration attorneys almost blindly. All immigration issues are handled by a big law firm - many of regular immigration matters are done by paralegals who does not know much (I am not exaggerating when I say I know more than them) - but our HR has a policy that they would follow what those attorney/paralegal is saying. It seems the law firm is suggesting them to withdraw all applications including approved i140 - obviously the law firm would charge them for this so that is their interest.
And law firm is right, they protect their clients. Search this forum for I-140 revocation by USCIS. I-140 was approved and then revoked by USCIS itself. In that case AC21 does not help, 485 will be denied.
more...
irfankhan25
04-06 04:33 AM
You can import PDF-compatible Adobe Illustrator files (.ai) directly into an open document in your Microsoft Expression Blend project.
When you import an Illustrator file into Expression Blend, Illustrator layers, groups, and objects are converted to Expression Blend containers and objects with associated properties. Understanding how Illustrator objects are imported into Expression Blend will help you integrate Illustrator files into your Expression Blend projects more quickly and efficiently.
When you save your file in Illustrator, make sure that the Create PDF Compatible File check box is selected in the Illustrator Options dialog box. Otherwise, you will not be able to import your Illustrator files into Expression Blend.
http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png)
To import an Illustrator file
Open the document into which you want to import the .ai file.
On the File menu, click Import Adobe Illustrator File.
In the Import Adobe Illustrator File dialog box, locate the Illustrator file that you want to import, and click Open.
Click OK.
A new Canvas object with the same name as your imported file is added to your document. In the Objects and Timeline panel, under the Canvas object (named AvatarSymbols in this example), are all of the Illustrator objects imported as Expression Blend objects. If images are imported as a part of your .ai file, a new folder (named AvatarSymbols_Images in this example) is created in the root folder in the Projects panel to contain all the converted image files.
Note: If there are no images associated with your project, a folder will not be created in the Projects panel.
http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png)
You can also create a custom folder in the Project folder for any images that are associated with your .ai file.
To create a custom images folder
In the Projects panel, right-click the .csproj file, and then click Add New Folder.
Type a name for the new folder in the folder name box.
With the folder selected in the Projects panel, import the Illustrator file by following the steps in the preceding procedure entitled “To import an Illustrator file.”
Layers, groups, and objects
Expression Blend imports Illustrator layers and groups as nested XAML Canvas objects containing paths and images. Nested Canvas objects are used as layout containers to make them easier to work with in Expression Blend. The following information will help you understand how to work with Illustrator files after they are imported.
Layer names
Layer names are preserved for the top-level groups (Avatars in the preceding image). After you import your Illustrator file into Expression Blend, you can change the name by right-clicking the object in the Objects and Timeline panel and then clicking Rename, or by double-clicking the object name and then typing directly in the object name field.
File structure and groups
Illustrator groups do not exist in PDF-compatible files, so are not imported into Expression Blend. However, the objects contained within an Illustrator group are imported as individual objects with the same positioning as in the Illustrator group.
Object types
Images are imported as PNG files and are added to an images folder in the Project panel, and added as Image objects in the Objects and Timeline panel. Text and vector objects are imported as editable paths and appear in the Objects and Timeline panel.
Visibility and lock
Visibility settings for Illustrator layers imported into Expression Blend are preserved. However, only visible objects within layers are imported. You can change which objects are imported into Expression Blend by changing the visibility settings of the objects within each layer in Illustrator.
Lock settings are ignored.
Editable content
If the imported content is editable, you can modify the appearance of the content in Expression Blend by modifying the object properties. The following table describes Illustrator elements that are editable in Expression Blend. Use the Description column to locate the properties for the object in order to modify them in Expression Blend.
Illustrator element Expression Blend element (XAML) Description Group Canvas Illustrator groups are ignored. However, the content of the group is imported as individual objects in the Objects and Timeline panel. Text (type objects) Canvas An Illustrator type object is imported as a Canvas object named TextBlock with the original Illustrator text imported as Path objects. Text styles are imported as separate Path objects. For example, a 5-letter word with a Strikethrough style applied is imported as a Canvas object containing 6 paths, one path for each letter of the word, and an additional path for the Strikethrough style.
Stroke Path An Illustrator stroke is imported as a path with the Stroke properties mapped to the Stroke brush in the Properties panel in Expression Blend. Solid color fill Path An Illustrator solid color fill is imported as a Path with the original Fill property mapped to Expression Blend Color properties applied to a Solid color brush. Solid color brush properties are located in the Brush category of the Properties panel.
Linear gradient fill Path An Illustrator linear gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Linear gradient brush properties applied to a Gradient brush. Linear gradient brush properties are located in the Brush category of the Properties panel.
Radial gradient fill Path An Illustrator radial gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Radial gradient brush properties applied to a Gradient brush. Radial gradient brush properties are located in the Brush category of the Properties panel.
Image layer Image An image object in Illustrator is imported as an Image object in Expression Blend. In addition, a PNG file is added to the project. The PNG file is the source for the Image object. Custom fill OpacityMask applied to an ImageBrush Illustrator supports multiple fills for an individual object. If an additional fill is applied to an object in Illustrator, and that fill contains an alpha channel, the fill is imported as an OpacityMask applied to an ImageBrush. For best results, use only one fill acting as an opacity mask in your Illustrator file. OpacityMask properties are located in the Brushes category in the Properties panel. In addition, a PNG file is added to the project. The PNG file is the source for the ImageBrush.
Note: You can verify whether or not multiple fills has been applied to an object by viewing the object properties in the Appearance panel in Illustrator.
Clipping mask Clip property An Illustrator clipping mask is imported as a Clip property. Clip properties are located in the Miscellaneous category in the Properties panel.
Note: The Clip property has limited support in Windows Phone projects.
Illustrator feature support in Expression Blend
The following Illustrator features are supported in Expression Blend. Where noted, features can be edited in Expression Blend.
Note: Although Expression Blend supports the following Illustrator features, for best results, create your Illustrator file using only vector art.
Text
Text layers imported from Illustrator are converted to a canvas, and each character is a separate path object that is a child of the canvas. The appearance of the text is maintained, but is no longer editable as text after it is imported.
If a single text layer in Illustrator contains hard returns, the text associated with each paragraph break will be imported as a separate canvas object when imported into Expression Blend.
Note: You may experience unexpected results when you import text from Illustrator. These results can include unexpected character rotation, kerning, point sizes, and alignment.
Text styles
The following Illustrator text effects create individual paths when imported into Expression Blend.
Subscript
Superscript
StrikeThrough
Underline
SmallCaps
AllCaps
Effects
Effects are supported, but not editable, in Expression Blend. Effects are rasterized and imported as Image objects. A PNG file is used as the source for the image object, and is located in the folder that is created in the Project panel.
Gradients
Expression Blend supports the importing and editing of linear and radial gradients. Color stops are imported as gradient brushes to the Fill property of the resulting object in Expression Blend, and opacity stops are imported as gradient brushes to the OpacityMask property.
Strokes
Custom strokes are imported as individual paths.
When you save an Illustrator file in PDF-compatible format, strokes and fills are saved as separate paths. When you import a PDF-compatible file into Expression Blend, a stroke and a fill on the same object may also be imported as separate objects. However, if the stroke and the fill are identical, the stroke and the fill may be merged into a single object when imported into Expression Blend.
Tags: Adobe Illustrator (http://expressioniq.com/?tag=adobe-illustrator), graphics (http://expressioniq.com/?tag=graphics), images (http://expressioniq.com/?tag=images)
This entry was posted on Friday, March 4th, 2011 at 12:54 pm and is filed under Expression Blend (http://expressioniq.com/?cat=7), SketchFlow (http://expressioniq.com/?cat=11). You can follow any responses to this entry through the RSS 2.0 (http://expressioniq.com/?feed=rss2&p=1951) feed. You can leave a response (http://expressioniq.com/?p=1951#respond), or trackback (http://expressioniq.com/wp-trackback.php?p=1951) from your own site.
When you import an Illustrator file into Expression Blend, Illustrator layers, groups, and objects are converted to Expression Blend containers and objects with associated properties. Understanding how Illustrator objects are imported into Expression Blend will help you integrate Illustrator files into your Expression Blend projects more quickly and efficiently.
When you save your file in Illustrator, make sure that the Create PDF Compatible File check box is selected in the Illustrator Options dialog box. Otherwise, you will not be able to import your Illustrator files into Expression Blend.
http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png)
To import an Illustrator file
Open the document into which you want to import the .ai file.
On the File menu, click Import Adobe Illustrator File.
In the Import Adobe Illustrator File dialog box, locate the Illustrator file that you want to import, and click Open.
Click OK.
A new Canvas object with the same name as your imported file is added to your document. In the Objects and Timeline panel, under the Canvas object (named AvatarSymbols in this example), are all of the Illustrator objects imported as Expression Blend objects. If images are imported as a part of your .ai file, a new folder (named AvatarSymbols_Images in this example) is created in the root folder in the Projects panel to contain all the converted image files.
Note: If there are no images associated with your project, a folder will not be created in the Projects panel.
http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png)
You can also create a custom folder in the Project folder for any images that are associated with your .ai file.
To create a custom images folder
In the Projects panel, right-click the .csproj file, and then click Add New Folder.
Type a name for the new folder in the folder name box.
With the folder selected in the Projects panel, import the Illustrator file by following the steps in the preceding procedure entitled “To import an Illustrator file.”
Layers, groups, and objects
Expression Blend imports Illustrator layers and groups as nested XAML Canvas objects containing paths and images. Nested Canvas objects are used as layout containers to make them easier to work with in Expression Blend. The following information will help you understand how to work with Illustrator files after they are imported.
Layer names
Layer names are preserved for the top-level groups (Avatars in the preceding image). After you import your Illustrator file into Expression Blend, you can change the name by right-clicking the object in the Objects and Timeline panel and then clicking Rename, or by double-clicking the object name and then typing directly in the object name field.
File structure and groups
Illustrator groups do not exist in PDF-compatible files, so are not imported into Expression Blend. However, the objects contained within an Illustrator group are imported as individual objects with the same positioning as in the Illustrator group.
Object types
Images are imported as PNG files and are added to an images folder in the Project panel, and added as Image objects in the Objects and Timeline panel. Text and vector objects are imported as editable paths and appear in the Objects and Timeline panel.
Visibility and lock
Visibility settings for Illustrator layers imported into Expression Blend are preserved. However, only visible objects within layers are imported. You can change which objects are imported into Expression Blend by changing the visibility settings of the objects within each layer in Illustrator.
Lock settings are ignored.
Editable content
If the imported content is editable, you can modify the appearance of the content in Expression Blend by modifying the object properties. The following table describes Illustrator elements that are editable in Expression Blend. Use the Description column to locate the properties for the object in order to modify them in Expression Blend.
Illustrator element Expression Blend element (XAML) Description Group Canvas Illustrator groups are ignored. However, the content of the group is imported as individual objects in the Objects and Timeline panel. Text (type objects) Canvas An Illustrator type object is imported as a Canvas object named TextBlock with the original Illustrator text imported as Path objects. Text styles are imported as separate Path objects. For example, a 5-letter word with a Strikethrough style applied is imported as a Canvas object containing 6 paths, one path for each letter of the word, and an additional path for the Strikethrough style.
Stroke Path An Illustrator stroke is imported as a path with the Stroke properties mapped to the Stroke brush in the Properties panel in Expression Blend. Solid color fill Path An Illustrator solid color fill is imported as a Path with the original Fill property mapped to Expression Blend Color properties applied to a Solid color brush. Solid color brush properties are located in the Brush category of the Properties panel.
Linear gradient fill Path An Illustrator linear gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Linear gradient brush properties applied to a Gradient brush. Linear gradient brush properties are located in the Brush category of the Properties panel.
Radial gradient fill Path An Illustrator radial gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Radial gradient brush properties applied to a Gradient brush. Radial gradient brush properties are located in the Brush category of the Properties panel.
Image layer Image An image object in Illustrator is imported as an Image object in Expression Blend. In addition, a PNG file is added to the project. The PNG file is the source for the Image object. Custom fill OpacityMask applied to an ImageBrush Illustrator supports multiple fills for an individual object. If an additional fill is applied to an object in Illustrator, and that fill contains an alpha channel, the fill is imported as an OpacityMask applied to an ImageBrush. For best results, use only one fill acting as an opacity mask in your Illustrator file. OpacityMask properties are located in the Brushes category in the Properties panel. In addition, a PNG file is added to the project. The PNG file is the source for the ImageBrush.
Note: You can verify whether or not multiple fills has been applied to an object by viewing the object properties in the Appearance panel in Illustrator.
Clipping mask Clip property An Illustrator clipping mask is imported as a Clip property. Clip properties are located in the Miscellaneous category in the Properties panel.
Note: The Clip property has limited support in Windows Phone projects.
Illustrator feature support in Expression Blend
The following Illustrator features are supported in Expression Blend. Where noted, features can be edited in Expression Blend.
Note: Although Expression Blend supports the following Illustrator features, for best results, create your Illustrator file using only vector art.
Text
Text layers imported from Illustrator are converted to a canvas, and each character is a separate path object that is a child of the canvas. The appearance of the text is maintained, but is no longer editable as text after it is imported.
If a single text layer in Illustrator contains hard returns, the text associated with each paragraph break will be imported as a separate canvas object when imported into Expression Blend.
Note: You may experience unexpected results when you import text from Illustrator. These results can include unexpected character rotation, kerning, point sizes, and alignment.
Text styles
The following Illustrator text effects create individual paths when imported into Expression Blend.
Subscript
Superscript
StrikeThrough
Underline
SmallCaps
AllCaps
Effects
Effects are supported, but not editable, in Expression Blend. Effects are rasterized and imported as Image objects. A PNG file is used as the source for the image object, and is located in the folder that is created in the Project panel.
Gradients
Expression Blend supports the importing and editing of linear and radial gradients. Color stops are imported as gradient brushes to the Fill property of the resulting object in Expression Blend, and opacity stops are imported as gradient brushes to the OpacityMask property.
Strokes
Custom strokes are imported as individual paths.
When you save an Illustrator file in PDF-compatible format, strokes and fills are saved as separate paths. When you import a PDF-compatible file into Expression Blend, a stroke and a fill on the same object may also be imported as separate objects. However, if the stroke and the fill are identical, the stroke and the fill may be merged into a single object when imported into Expression Blend.
Tags: Adobe Illustrator (http://expressioniq.com/?tag=adobe-illustrator), graphics (http://expressioniq.com/?tag=graphics), images (http://expressioniq.com/?tag=images)
This entry was posted on Friday, March 4th, 2011 at 12:54 pm and is filed under Expression Blend (http://expressioniq.com/?cat=7), SketchFlow (http://expressioniq.com/?cat=11). You can follow any responses to this entry through the RSS 2.0 (http://expressioniq.com/?feed=rss2&p=1951) feed. You can leave a response (http://expressioniq.com/?p=1951#respond), or trackback (http://expressioniq.com/wp-trackback.php?p=1951) from your own site.
hot Orkut Scraps - Happy
kirupa
03-02 04:07 AM
Lill - the last day is March 27th :)
more...
house anniversary for my parents
JunRN
11-09 12:00 AM
That same link you gave tells us that 655k is pending/back-log for AOS....
tattoo happy anniversary quotes
nc14
02-18 03:41 PM
So, if one is going for Intemized Deductions, can we actually put the expenses that we have incurred for 485 filing (lawyer fees + fees to USCIS) as deductions?
more...
pictures HAPPY ANNIVERSARY to my
vparam
05-23 01:49 AM
Mchundi,
I understand your anxiety. To answer your questions:
There is no chance of having any single set of provisions "become law immediately."
Unfortunately, we have to let this current round of discussions on CIR play out. What should we root for? That amendments to the current CIR that basically gut the bill fail. If the bill survives these amendments then we stand a good chance of succeeding in our efforts.
For strategic reasons, we cannot disclose everything we know about behind the scenes agreements.
Hang in there!
best,
Berkeleybee
- Why is it not possible for IV to convince brownback or cronyn to support in a amedment that backlog reduction section for legal immigrants could take effect immdiately. it looks like for legal immigrants except for sen.session no one opposes any provision.
Thanks
vikram
I understand your anxiety. To answer your questions:
There is no chance of having any single set of provisions "become law immediately."
Unfortunately, we have to let this current round of discussions on CIR play out. What should we root for? That amendments to the current CIR that basically gut the bill fail. If the bill survives these amendments then we stand a good chance of succeeding in our efforts.
For strategic reasons, we cannot disclose everything we know about behind the scenes agreements.
Hang in there!
best,
Berkeleybee
- Why is it not possible for IV to convince brownback or cronyn to support in a amedment that backlog reduction section for legal immigrants could take effect immdiately. it looks like for legal immigrants except for sen.session no one opposes any provision.
Thanks
vikram
dresses hairstyles anniversary quotes
MatsP
November 1st, 2005, 03:02 AM
Thanks for the feedback, Mats. It may sound like an excuse, but the client actually wanted this. She brought a couple of Japanese catalogs as examples of these sorts of preserved flower arrangements, and they all tended to a shallow DoF, overexposed, soft look. For the arrangements, I didn't much care for the style, but for the single rose, I rather liked the result.
I convinced her that having some sharp detail was good, but she really liked the shallow, overexposed look. Hence the light colored backgrounds in most of the shots, and a central blossom. I am rather glad of that, since, when left to myself, I was having a devil of a time trying to get a DoF that kept the subject sharp, and put the background OoF. I think I need a bigger "studio" next time (instead of my dining table...).
OTOH, maybe studio work isn't really for me...
Hey, if you have a paying customer that is happy and a freeloading web-browsing "advisor" that isn't, then that's a pretty good state of affairs. Customer happy is much more important than just about anything, especially if the customer is paying.
--
Mats
I convinced her that having some sharp detail was good, but she really liked the shallow, overexposed look. Hence the light colored backgrounds in most of the shots, and a central blossom. I am rather glad of that, since, when left to myself, I was having a devil of a time trying to get a DoF that kept the subject sharp, and put the background OoF. I think I need a bigger "studio" next time (instead of my dining table...).
OTOH, maybe studio work isn't really for me...
Hey, if you have a paying customer that is happy and a freeloading web-browsing "advisor" that isn't, then that's a pretty good state of affairs. Customer happy is much more important than just about anything, especially if the customer is paying.
--
Mats
more...
makeup ANNIVERSARY QUOTES PARENTS
jthomas
01-10 08:41 PM
What are the options for a H1B holder when he/she gets laid off during this present economy?
I voted as yes, I know my friends who had been laid off from work.
J thomas
I voted as yes, I know my friends who had been laid off from work.
J thomas
girlfriend tattoo happy anniversary
hsingh82
06-15 11:26 PM
Indonesia
I think your best bet would be that your parents apply for visa alone. I believe this will improve their chances of getting visa and once they get the visa then your siblings can apply. Good luck!
I think your best bet would be that your parents apply for visa alone. I believe this will improve their chances of getting visa and once they get the visa then your siblings can apply. Good luck!
hairstyles Happy Anniversary Quotes
saro28
11-02 09:19 AM
Now my Lawyer is advising me to include the old fees and a new application with a letter stating motion to refile seeking correction. He is insisting on us to send the fees ($350) again. Any suggestions? Can I send it directly to INS?
paskal
08-05 09:23 PM
delighted to hear you are finalizing your plans
let me know when you have things in place, also if i can help you in any way. we should encourage more mn members to join us in DC, maybe even plan on making some calls. your motivation should serve as inspiration to others!
let me know when you have things in place, also if i can help you in any way. we should encourage more mn members to join us in DC, maybe even plan on making some calls. your motivation should serve as inspiration to others!
Munna Bhai
11-16 02:02 PM
what is the difference between visa bulletin and processing dates, how they are related.
Thanks,
Thanks,
No comments:
Post a Comment